| Mill No | Size | Type | Year | Condition | History | Name | Area |
|---|
| 10967 | 12' | ZA | 1932 | | | | |
| 12284 | | ZB | 1933 | | | | South Africa |
| 19437 | 6' | ZA | 1935 | Running | Purchased from property 6kms south of Lake Goldsmith, Vic, May 2017 | | |
| 23542 | 12' | ZD | 1936 | | | | |
| 23675 | | Z | | | | | |
| 29954 | 6ft | ZA | 1938 | | | | |
| 34712 | 10’ | ZC | 1939 | Restored | | | |
| 38932 | 10' | ZC | 1940 | | | | Qld |
| 38932 | | Z | 1940 | | | | |
| 40265 | | ZB | 1941 | | | | |
| 41518 | | Z | 1941 | | | | |
| 42552 | | Z | 1941 | | | | |
| 47208 | | Z | 1942 | | | | |
| 48918 | | Z | 1942 | | Still supplying house and garden On a 16 foot four post tower with odd broken bits of another 1930's mill scattered on ground | | |
| 54451 | | ZC | 1944 | | Acquired from Gympie Qld but not the original installation. Remarkably good and will undergo full restoration | | Qld |
| 54174 | | Z | 1944 | | Fell in storm,damaged Bought from a old dairy farm Benarkin north QLD Will be repaired and stood on a property at Ellesmere QLD | | |
| 55066 | 12’ | Z | 1945 | | Original still in use | | |
| 55102 | 12’ | ZD | 1944 | Restored | have completely repaired and rebuilt, and it is now working in my front yard and is soon to start pumping water for household use. 06 | | Nth Qld |
| 62916 | 8’ | Z | 1945 | | Original still in use | | |
| 63939 | | Z | 1945 | | Model za1c -wet sump / 6ft fan /24ft tower / 3 legged, purchased off a farm at pine lodge ( near shepparton ) Victoria .Mill had been on the ground for the last 25 years .
Now relocated to Rushworth -vict. Tower has undergone a full rework including a new iron bark platform & new legs into the ground Followed tower erection instructions as set out in a S.Cross manual of a 1950 vintage.The gear box/ engine head had a lot of very worn , broken parts , along with completely worn out main shaft bearings. Near new orginal pinion gears / a new orginal bronze oil scraper & new crank arms have been fitted. In terms of having the gearbox -main shaft bearings recast in white metal , due to the excessive cost involved have opted to line-bore the casting & then fit 3 x self lubricating brass bearing shells. ( took 7 hours to set up &bore on a small vertical milling machine ) I have been able to source parts thru a 88 year old local who used to service mills when he -was in his twenties. Hardest part to date has been repainting the southern cross name onto the corrugated iron tail.-Next stage is to refit gear box & fan into the stub tower .
Peter | | |
| 65782 | 6’ | Z | 1945 | | Original still in use | | WA |
| 66285 | | ZD | 1945 | | | | |
| 66887 | | ZB1B | 1946 | | | | |
| 69104 | | ZB | 1946 | | Currently On the ground (2020) for service and repair of platform and relocation over Well as New shed built on previous location. new location 10 meters north. Considering powder coating in Flouro Orange and New Flouro Orange tail for high visibility as I am a Hang glider pilot and land in the Paddock next door. | | |
| 67722 | 6' | ZA | | | | | South Africa |
| 69314 | 8' | ZB | 1946 | | The windmill was bought early 2022 after sitting unused on a farm in Wilsons Plains Qld for years, now mechanically restored but retains its original patina is now pumping dam water on our place in Walloon Qld | | |
| 84962 | 6’ | ZA | 1948 | | purchased new by previous farm owner | Rob | Young |
| 93160 | | Z | 1950 | | I rescued it from a development bulldozer, but a large Box Thorn had bent the three legs so badly that it collapsed when the tree was removed from it. I can’t match the steel used, but will use a slightly larger angle to replace the three lower sections and should have it re-erected in a working condition. The wheel is in good condition, but the pump is a little rusted | David | Vic |
| 99853 | 8’ | ZB | 1950 | | came from Rye Park | Rob | Young |
| 85063 | 6' | ZA | 1948 | | | | |
| 88355 | 8' | ZB | 1949 | | Purchased from Kenmore Park Stn 2004 | | |
| 95369 | 10' | z | 1950 | | | | |
| 103106 | 10' | ZC | 1951 | | Being restored for use on property in Bridgetown. Western Australia. Purchased in Perth metro area off rural holding in Wellard.. 30 kms south of Perth | | |
| 112834 | | ZB | | | | | |
| 132190 | 8' | IZ | 1957 | | All original parts ...nothing broken | | |
| 139805 | | IZD | 1959 | | Some fan blades need replacing | | |
| 144340 | | IZC | 1960 | | The tripode is in good condition | | |
| 144700 | | IZB | | | | | |
| 146687 | 10’ | IZ-C | 1961 | Original | The mill/gearbox will be reconditioned and windmill reerected | | Qld |
| 146738 | 10’ | IZ-C | 1961 | Original | Still in use | | Qld |
| 149279 | 10’ | IZ-C | 1962 | Original | Still in use | | Qld |
| 149374 | 10’ | IZ-C | 1962 | Original | Still in use | | Qld |
| 162313 | 12’ | IZ-D | 1967 | Original | Still in use | | Qld |
| 163316 | 10’ | IZ-C | 1967 | Original | Still in use | | Qld |
| 133243 | 6' | IZ | 1957 | Working | | | Qld |
